Dimethoxymethane, also called methylal, is a colorless flammable liquid with a low boiling point, low viscosity and excellent dissolving power. This PFD shows a 3-tower methylal production process flow. Download EdrawMax and start creating PFD diagrams.

Demineralization of water is the removal of essentially all inorganic salts by ion exchange.

Having a specific emergency response procedures manual outlining what to do in the event of an emergency is very crucial in a kindergarten.

It is important to have more than one exit in case of emergency for safe evacuation

This figure represents a typical a process flow diagram (PFD) of an Internal Gasification Combined Cycle (IGCC) power plant technology featuring an oxygen‐blown, entrained‐flow, refractory lined gasifier with continuous slag removal.

A steam turbine is a device that extracts thermal energy from pressurized steam and uses it to do mechanical work on a rotating output shaft.

Geothermal power plant process flow diagram, showing direct contact condenser and hybrid ejector/vacuum pump gas removal system. Steam is supplied from the flash separation process at a single pressure. Steam exiting the turbine is condensed in a direct contact condenser, supplied with cold water from a cross-flow cooling tower. The condensed steam and the cooling water are returned to the cooling tower. Brine, condensate, and cooling tower blow-down are injected back into the geothermal reservoir.

A nuclear power plant is a thermal power station in which the heat source is a nuclear reactor. As is typical of thermal power stations, heat is used to generate steam that drives a steam turbine connected to a generator that produces electricity.

Here I make a Sand filter which is used to remove TSS (Total suspended solids) from raw water it is easy to draw the design in EdrawMax. It is made of MS, SS, and FRP material, but the design remains the same. Sand filters are used as a step in the water treatment process of water purification. There are three main types; rapid (gravity) sand filters, upward flow sand filters and slow sand filters. Check more details from this diagram, and learn more from EdrawMax templates gallery.

Here is an industrial process diagram about the open circuit cooling tower. A piping and instrumentation diagram is an articulate drawing of a processing plan that entails the piping and process equipment with its instrumentation and control machinery. It displays the piping and associated parts of a physical process flow. Such diagrams are famous in the engineering field. Learn more details from this diagram, and try to make yours with ease now.