Waste Activated Sludge Treatment Plant
IWG 100 IWG 101 anoxic anaerobic aerobic Raw Sewage feed Manual valve Primary lifting pump room Coarse screen Fine screen Vortex Grit removal Manual valve Secondary lifting pump room distribution well Primary sludge thickener Primary sludge sump Primary settling tank distribution well Secondary settling tank 14 15 16 Digester pumping station Primary sludge digester 18.1 secondary Sludge digester 18.2 19 Anaerobic sludge sump 23 Sludge dewatering building Pond Re-use water pumps station Sludge recycle pump station Secondary sludge thickener 20 aerobic digester 21 18c Incinerato r building Gas holder 18a Sludge drying bed Project Works: 1. Installation of 12 000 m 3 /h Odour Control Unit at Tanker Discharge bay; 2. Replacement of Influent Control Penstock Valve; 3. Replacement of Inlet Isolation Penstock Valve; 4. Installation of actuated primary and secondary screw pump isolation penstock valves; 5. Refurbishment of the primary and secondary screw pumps; 1. Refurbishment of coarse and fine screens; 2. Re-design of the Vortex De-gritt system; 3. Installation of 7 000 m3/h Odour Control Unit for Inlet works; 4. Replacement of motor drives with energy saving soft starter drives and variable speed drives; 5. Refurbishment of mixers and aerotors; 6. Refurbishment of primary and secondary settling tanks; 7. De-silting of all WWTP units. Plant 1 & 2 Flow Chart of Glen Valley Wastewater Treatment Plant Compressor 18d Boiler & heat exchanger 22 Aerobic sludge sump 1 2 3 4 5 6 7 8 9 10 11 12 13 18b Return water 25 24
publish time: 2021-05-19
Here is an industrial process chart for the Glen Valley waste-activated sludge treatment plant. The Industrial Control System (ICS) is a specific term used to define the combination of software and hardware with the network to balance the critical industrial infrastructure. It uses various technologies such as programmable logic controllers. Learn more details from this diagram, or try to make yours with ease.
See More Related Templates